On-line le ultime guide da scaricare, dove troverete tutte le info per le vostre pinne FCS....
SCARICA LA 1° PARTE - thruster sets
SCARICA LA 2° PARTE - FCS the systems
thruster sets (see over for quad, specialty, fi xed and longboard fi ns)
XS Weight: under 55kg // template: FCS 2
The PC-2 and M-2 feature a high performance template in two different materials. This dynamic fin template features a long base and moderate size tip which delivers fast acceleration and instant response for groms and lighter surfers. Also suitable for use as a quad rear fin.
K2.1 Grom Kelly Slater’s signature fin scaled down for the Groms. Ideal for hollow waves and tight pocket surfing.
G-X Ultra small thruster set for very light surfers. Can also be used as a quad rear.
G-1000 Reliable all-round template with forgiving flex pattern for lighter surfers.
THRUSTER SPECS FIN / BASE / DEPTH / AREA / SWEEP / FOIL / FLEX / CANT / SIZE
Flex Key: ( = Less Flex ) ( = More Flex ) When a fin template is available in multiple materials, Flex Key refers to Performance Core.
S Weight: 55 - 70kg // template: FCS 3
The PC-3, FG-3, PG-3 and M-3 feature the proven and reliable G-3000 performance template in a variety of different materials and foils. This popular all round template will provide fast acceleration with an even blend of manoeuvrability and hold. A favourite with the pros for many years.
H-2 Small Exceptional hydrodynamic performance. Fast and free with incredible hold and drive.
AB-1 Al Byrne’s signature template. Ideally suited to boards with deep channels.
AB-2 Al Byrne’s signature template with IFT. Ideally suited to boards with deep channels.
PERFORMANCE CHARACTERISTICS
Drive Drive provides forward acceleration and helps maintain speed through turns. The amount of drive produced by a fin is directly influenced by the base length, material and the total surface area. Put simply; a larger fin with a longer base will offer. (more drive / less drive / more drive)
Pivot Pivot refers to the length of the turning arc. Pivot is influenced by the sweep angle or rake, the foil and the depth of the fin. Fins with less sweep angle will turn in a tighter arc; fins with more sweep angle will turn in a longer arc. (tight arc / long arc)
Hold Hold is defined as the binding of the board to the wave. Hold is determined by flex and the overall fin template. Fins with more hold prevent the board sliding through turns, less hold allows the board to easily break free from the wave during turns; this is often referred to as ‘release’. (less hold / more hold)
All FCS thruster, quad and quad rear fins come with fin ratings. These fin ratings provide the drive, pivot and hold characteristics of each individual fin set. FCS provides these fin ratings as a guide to individual fin performance. They can also be used as a reference when choosing a fin for specific performance requirements. Fins are rated relative only to the fins within each size category and are not comparable across other sizes. For example, the drive rating on a medium fin can only be compared to the drive rating on other medium fins.
M Weight: 65 - 80kg // template: FCS 5
The PC-5, FG-5, PG-5 and M-5 feature the proven and reliable G-5000 performance template in a variety of different materials and foils. This popular all round fin will provide a very consistent feel over a wide range of conditions and board models. A favorite with the pros for many years.
H-2 Medium Exceptional hydrodynamic performance. Fast and free with incredible hold and drive.
LB-1 Layne Beachley’s signature fin offering consistent speed and drive in average conditions.
TC Aqua-line Tom Carroll’s signature fin with added cant angle on the side fins. Ideal for on-rail performance.
S25 Medium Simon Anderson’s signature template. Delivers an even blend of drive and pivot with exceptional hold.
AM-2 Smaller version of Al Merrick’s signature template. Smaller centre fin offers quick release through turns.
DHD-2 Darren Handley’s signature template. Centre fin can be moved forward and back to customise response.
K2.1 Kelly Slater’s signature fin for hollow waves and tight pocket surfing.
K3PC Kelly Slater’s signature fin ideally suited to open face waves and longer turning arcs.
GOODS-1 The Hobgood’s signature fin offering a consistent feel in a variety of conditions.
L Weight: 75 - 90kg // template: FCS 7
The PC-7, FG-7, PG-7 and M-7 feature the proven and reliable G-7000 performance template in variety of different materials and foils. This popular all round fin will provides exceptional drive and hold yet still offers outstanding manoeuvrability for a large fin. A favorite with the pros for many years.
H2 Large Exceptional hydrodynamic performance. Fast and free with incredible hold and drive.
TC Redline Tom Carroll’s signature fin. Exceptional drive and hold with a narrow quick release tip.
R2 Co-designed by Rusty and Curtis Hasslegrave. High performance fin for powerful surfers.
S25 Large Simon Anderson’s signature template. Delivers an even blend of drive and pivot with exceptional hold.
G-AM Al Merrick’s original signature template. Smaller centre fin offers quick release through turns.
GMB-5 TRI Matt ‘Mayhem’ Biolos’s signature template. A lively combination of drive, hold and manoeuvrability.
SF4 TRI William ‘Stretch’ Riedel’s signature template offering dependable performance in all conditions.
G-6 All round high performance fin template with a flat sided foil and engineered flex pattern that offers dynamic response.
CHILLI 9 James ‘Chilli’ Cheal’s signature template. Long base with less sweep offers a blend of speed and manoeuvrability.
XL weight: 85kg +
G8 High performance template ideally suited to powerful surfers who like to push hard against their fins.
Sunny Garcia Sunny Garcia’s signature fin. Exceptional drive and hold, ideal for power surfing.
The information contained in the FCS fin poster should be considered when choosing a set of fins. For more detail on the entire fin range visit: www.surffcs.com Changing your fins to fine tune your equipment is the key to maximizing performance.
Project Green Flex This FCS M-5 fin is made from 50% post consumer waste that would otherwise end up as landfill. Helping the planet without sacrificing performance. surffcs.com
MATERIALS
Ultra-Light Epoxy (UL) Ultra-Light Epoxy was developed by FCS to create the lightest possible fin with superior flex properties while ensuring strength and foil accuracy. By minimizing weight without sacrificing response of flex and strength, Ultra-Light Epoxy is our lead construction process delivering the ultimate in performance.
Performance Core (PC) Performance Core material and construction is designed to deliver the feeling of a traditional fiberglass fin with the added performance of reduced weight. The RTM (Resin Transfer Molding) process produces a lightweight fin with remarkable flex, a smooth feel and an impressive aesthetic.
Composite Core (CC) Composite Core construction combines the Resin Transfer Molding (RTM) process with a molded glass and resin core insert to produce a lightweight fin with superior tip flex. The core insert increases the overall thickness of the foil ensuring hydrodynamic efficiency, a stiffer base and dynamic flex response through the tip.
Glass Flex (GF) Glass Flex has been formulated to replicate the flex and memory properties of hand layed fiberglass. Its advantages over other composite fin materials include stiffness, a more positive flex pattern (nice tip flex, little base flex) and remarkable flex memory. The precision of the injection molding process ensures the highest accuracy in geometry in each fin produced.
Performance Glass (PG) Performance Glass material characteristics and flex pattern are identical to traditional fiberglass fins offering a stiff base with subtle responsive tip flex, amazing aesthetics and proven durability. PG fins are the perfect transition fin for surfers moving from fixed fins to the convenience, accuracy and performance of FCS.
FIN CHARACTERISTICS DRIVE PIVOT HOLD LESS DRIVE TIGHT ARC LESS HOLD MORE DRIVE LONG ARC MORE HOLD WEIGHT LIGHTER HEAVIER MORE RESPONSIVE LESSRESPONSIVE MORE HOLD LESS HOLD LESS DRIVE MORE DRIVE LESS PIVOT MORE PIVOT LOOSE STIFF FLEX DEPTH BASE SWEEP CANT FOIL FOILS
Flat Foil A flat inside face combined with a convex outside face. The traditional flat sided foil offers an even combination of drive, pivot and hold and provides a very consistent, reliable feel over a wide variety of conditions.
Inside Foil A sophisticated hydrodynamic foil consisting of a convex outside face, a rounded leading edge and a concaved inside face. Inside foil increases the efficiency of water flow over the surface of the fin adding lift and reducing drag. The result is a fin with more options through increased hold and speed.
50/50 A symmetrical foil used on all centre fins where both sides are convex. Even water flow on both sides creates stability and control.
FCS the systems
X-2 FCS X-2 represents the newest version of the world renowned fin system featuring the latest in design and construction.
Features; • most widely used fin system in the world • EPS/Epoxy and PU/Polyester compatible • strongest and lightest post-glass system on the market • small individual footprint does not compromise rocker or tail fl ex • unique H-Pattern anchoring system • less base fl ex = increased performance • minimises weight while maintaining the board’s natural balance • shapers dots remain visible • suits all bottom contours including channels and bonzers • preferred system for the worlds best surfers
Fusion FCS Fusion offers the performance advantages of FCS in a system that is installed before the board is laminated, otherwise known as pre-glass.
Features; • precision molded polymer plug with high density foam insert • EPS/Epoxy and PU/ Polyester compatible • strongest and lightest pre-glass system on the market • shorter footprint than other pre-glass systems • does not compromise rocker and tail fl ex • less base fl ex = increased performance • minimizes weight while maintaining the board’s natural balance • elongated slots offer forward & aft movement • shapers dots remain visible • fits most bottom contours
Fin Box The FCS Fin Box provides superior single fin performance through quality materials, unparalleled strength and a design which has lasted the test of time.
Features; • glass filled polycarbonate construction • EPS/Epoxy and PU/Polyester compatible • easy to install • fits all single fin bases • rounded ends relieve stress on the resin surrounding the box • perimeter resin channels provide strength and stability • can be used on longboards, single fins, bonzers and other retro shapes
Soft Board The FCS Softboard System offers all the performance advantages of FCS in a technically advanced system that will fit any softboard on the market.
Features; • high-strength precision molded polymer construction • fits all model softboards easy single tool installation • engineered thread attachment system maintains a tight and secure fi t • use any fin from the FCS range • ideal for beginners through to advanced surfers • FCS M-5 softflex fin included with system • fins easily removed for multiple softboard storage • non-intrusive design sits flush to the surface of the board.
(see over for thrusters)
Quads
Choosing a Quad Set FCS gives you the freedom to choose from our extensive range of quad sets, or you can add rear fins to your existing thruster side fins and customize your own quad set up. Use the following information to narrow your search and help determine which quad set or rear fin will ultimately work for you and your board.
Step 1: Rear Fin Position Checking your rear fin position allows you to pick the correct quad set or rear fin that will suit your board. closer to the stringer) (closer to the rail) (set forward) (set back)
Step 2: Rear Fin Size The size of the rear fin will have a major influence on the pivot and hold characteristic of your board. (small rear fins) (medium rear fins) (large rear fins)
Step 3: Rear Fin Foils Choose a foil that best suits your rear fin position and the desired performance you want to achieve.
Flat: Mimics the performance of a regular side fin, offering fast transitions between turns, quick release and added hold on rail. (Ideal for boards with a wider tail; performance shortboards; and boards with rear fins positioned close to the rail)
70/30 or 80/20: Combines the performance of a centre and side fin, offering increased speed, smooth rail-to-rail transitions and a consistent feel in a variety of conditions. (Ideal for all board types and rear fin placements)
50/50: Mimics the performance of a regular centre fin offering increased pivot with the added advantage of stability and control. (Ideal for all board types and rear fins positioned closer to the stringer)
Quad specs FIN / BASE / DEPTH / AREA / SWEEP / FOIL / FLEX / CANT / SIZE
Flex Key: ( = Less Flex ) ( = More Flex ) When a fin template is available in multiple materials Flex Key refers to Performance Core. Fixed Fins
G3 Clear / White Small size FCS G-3 fixed fin template constructed in clear Performance Core (PC) material.
G5 Clear / White Medium size FCS G-5 fixed fin template constructed in clear Performance Core (PC) material.
G7 Clear / White Large size FCS G-7 fixed fin template constructed in clear Performance Core (PC) material.
Small
Weight: 55 - 70kg // template: FCS Q-PC3
Q-PC3 FCS quad set featuring PC-3 in the side and GX-Q in the rear.
Q-3Xc FCS quad set featuring the M-3 in the side and G-X centres in the rear.
Q31000c FCS quad set featuring the M-3 in the side and G-1000 centres in the rear.
Q-3Q1s FCS quad set featuring the M-3 in the side and Q-1 in the rear.
Medium
Weight: 65 - 80kg // template: FCS Q-PC5
Q-PC5 FCS quad set featuring PC-5 in the side and GX-Q in the rear.
Q-5Xc FCS quad set featuring the M-5 in the side and G-X centres in the rear.
Q-51000c FCS quad set featuring the M-5 in the side and G-1000 centres in the rear.
Q-5Q1's FCS quad set featuring the M-5 in the side and Q-1 in the rear.
McKee Bruce Mckee’s signature quad set featuring the M-5 in the side and the M-2 in the rear.
TC Aqua-Line Tom Carroll’s signature quad set. Added cant angle provides more pivot and performance while on rail.
S-25 Medium Simon Anderson’s signature quad set. Exceptional reliability and hold in all conditions.
Large Weight: 75 - 90kg // template: FCS Q-PC7
Q-PC7 FCS quad set featuring PC-7 in the side and GX-Q in the rear.
Q-7Xc FCS quad set featuring the M-7 in the side and G-X centres in the rear.
Q-71000c FCS quad set featuring the M-7 in the side and G-1000 centres in the rear.
Q-7Q1s FCS quad set featuring the M-7 in the side and Q-1 in the rear.
R-2 Quad Rusty’s signature quad set. Dependable performance with larger surface area suited to more powerful surfers.
SF4 William ‘Stretch’ Riedel’s signature quad set offering dependable performance in all conditions.
S-25 Large Simon Anderson’s signature template. Delivers an even blend of drive and pivot with exceptional hold.
PERFORMANCE CHARACTERISTICS
Drive Drive provides forward acceleration and helps maintain speed through turns. The amount of drive produced by a fin is directly influenced by the base length, material and the total surface area. Put simply; a larger fin with a longer base will offer more drive.
Pivot Pivot refers to the length of the turning arc. Pivot is influenced by the sweep angle or rake, the foil and the depth of the fin. Fins with less sweep angle will turn in a tighter arc; fins with more sweep angle will turn in a longer arc.
Hold Hold is defined as the binding of the board to the wave. Hold is determined by flex and the overall fin template. Fins with more hold prevent the board sliding through turns, less hold allows the board to easily break free from the wave during turns; this is often referred to as ‘release’.
Please note: Fins are rated relative only to the fins within their size category and are not comparable across other sizes. For example, the drive rating on a medium fi n can only be compared to the drive ratings on other medium fins.
Quad Rears
G-XQ Quad rear fin with 80/20 foil to suit a variety of different boards and fin positions.
Q-R Quad rear fin developed by Rusty. A fuller tip delivers superior drive and hold.
All FCS thruster, quad and quad rear fins come with fin ratings. These fin ratings provide the drive, pivot and hold characteristics of each individual fin set. FCS provides these fin ratings as a guide to individual fin performance. They can also be used as a reference when choosing a fin for specific performance requirements.
Example of the fin ratings: Size Ratings
SPECIALITY FINS
M.R TFX MR’s twin template designed for twin fin & fish set-ups. Available as a twin or with a stabilizer fin.
G-L High performance traditional longboard side fin.
G-X High performance traditional longboard side fin
G-S Single trailer fin adds stability & control to fish or twin set ups.
M.R '78 MR’s original 4 x World Title winning template. Extremely functional old school twin fin.
M-5 Softflex Highly flexable M-5 template for softboards & beginers.
K-Flex K2.1 template with a shock absorbing outer coating.
Stretch tow William ‘Stretch’ Riedel’s quad tow set for 10ft + waves. High speed manoeuvrability in machine cut G10 material.
Soft-tech G-5 fin with rigid body and shock absorbing urethane edge
B5 Bonzer side fins. Developed by the Campbell Brothers.
AB-Tow Developed by Al Byrne for towing 15ft+ waves. Stability & directional control in machine cut G10 material.
